Description of device parameters
Deltabar FMD71, FMD72
64
Sim. Press. LP (285)
Navigation
Expert → Diagnosis → Simulation → Sim. Press. LP (285)
Write permission
Operators/Service engineers/Expert
Description
Enter the simulation value. See also "Simulation Mode".
Prerequisite
"Simulation Mode" = Pressure LP
Value at switch-on
Current pressure measured value
Connect transm. (286)
Navigation
Expert → System → Management → Connect transm. (286)
Write permission
Service engineers/Expert
Description
Determine the transmitter connection. After both sensor modules are replaced or if the
main electronics fail, the configuration has to be redefined using this parameter.
Options
• At sensor HP
• At sensor LP
Factory setting
At sensor HP
Sensor Changes (287)
Navigation
Expert → Diagnosis → Sensor Changes (287)
Write permission
No write permissions. Parameter is read only.
Description
Displays the number of sensor module changes.
3rd disp. value (288)
Navigation
Expert → System → Display → 3rd Disp. Value (288)
Write permission
Operators/Service engineers/Expert
Description
Specify the contents for the third value in the alternating display mode in measuring
mode.
Summary of Contents for Deltabar FMD71
Page 2: ......
