68
Reference Manual
00809-0200-4702, Rev CA
Section 7: Mounting, Wiring Switches and Output
Circuits, Models 702DX32 and 702DX42
February 2013
Mounting, Wiring Switches, and Output Circuits:
Models 702DX32 and 702DX42
Note
Any dry contact input can be inverted by the device, so as to change the discrete logic state. This
is useful, for instance, if a normally open switch is used to replace a normally closed switch.
Figure 7-6. Single, Dual Input
Dual Input, Limit Contact Logic
When configured for Limit Contact Logic, the 702 transmitter will accept the input from two
single pole single throw switches on inputs CH1 and CH2, and will use limit contact logic for the
determination of the wireless outputs. Please reference
Figure 9-3 on page 86
for details on the
wireless outputs available when using limit contact logic.
Figure 7-7. Dual Input, Limit Contacts
Dual Input, Opposing Contact Logic
When configured for Opposing Contact Logic, the 702 transmitter will accept the input from a
single pole double throw switch on inputs CH1 and CH2, and will use opposing contact logic for
the determination of the wireless outputs. Please reference
Figure 9-4 on page 87
for details on
the wireless outputs available when using opposing contact logic.
