Emerson Powerdrive F300, Reference Manual

Page: 159 / 342

Parameter 09.050 Timer 2 Enable
Short description Set to enable the timer 2 function
Mode Open ‑ Loop
Minimum 0 Maximum 1
Default 0 Units
Type 1 Bit User Save Update Rate Background read
Display Format Standard Decimal Places 0
Coding RW
Timer 2 Enable (09.050) enables the timer 2 function. If Timer 2 Enable (09.050) = 0, then the output of the timer is always inactive, i.e. Timer 2 Output
(09.052) = 0.
Parameter 09.051 Timer 2 Invert
Short description Set to invert the output of timer 2
Mode Open ‑ Loop
Minimum 0 Maximum 1
Default 0 Units
Type 1 Bit User Save Update Rate Background read
Display Format Standard Decimal Places 0
Coding RW
Timer 2 Invert (09.051) inverts the timer output to give an active state of 0 instead of 1.
See Timer 1 Invert (09.041) for more information.
Parameter 09.052 Timer 2 Output
Short description Shows the output state of timer function 2
Mode Open ‑ Loop
Minimum 0 Maximum 1
Default Units
Type 1 Bit Volatile Update Rate Background write
Display Format Standard Decimal Places 0
Coding RO, ND, NC, PT
Timer 2 Output (09.052) shows the output of timer function 2.
Parameter 09.053 Timer 2 Destination
Short description Defines the output destination of timer function 2
Mode Open
‑
Loop
Minimum 0.000 Maximum 59.999
Default 0.000 Units
Type 16 Bit User Save Update Rate Drive reset read
Display Format Standard Decimal Places 3
Coding RW, DE, PT, BU
Timer 2 Destination (09.053) defines the output destination of timer function 2.
Parameter 09.055 Scope Trace 1 Source
Short description Defines the source of scope trace 1
Mode Open
‑
Loop
Minimum 0.000 Maximum 59.999
Default 0.000 Units
Type 16 Bit User Save Update Rate Drive reset read
Display Format Standard Decimal Places 3
Coding RW, PT, BU
Up to four scope sources can be selected using Scope Trace 1 Source (09.055) to Scope Trace 4 Source (09.058). If the source value is set to 0.000,
or the source parameter does not exist or is non-visible, then no source is selected. The sources do not operate in the same way as normal source
parameters in that the input to the scope is the actual value of the parameter and not a value scaled to a percentage based on the range of the
parameter. If a scope trace source parameter is modified the actual change is not effective until the drive is reset.
Parameter 09.056 Scope Trace 2 Source
Short description Defines the source of scope trace 2
Mode Open ‑ Loop
Minimum 0.000 Maximum 59.999
Default 0.000 Units
Type 16 Bit User Save Update Rate Drive reset read
Display Format Standard Decimal Places 3
Coding RW, PT, BU
Powerdrive F300 Parameter Reference Guide
Issue: 01.15.00
159