Emerson OMIOLM001 User Manual Download Page 150

Page: 150 / 157

RSTi-OM User Manual

Section 14

GFK-3212A

Jun 2021

Troubleshooting

149

14.4

Using Log Files

The IO-Link Master provides five different log files that you can view, export, or clear:

•

Syslog (system log) displays line-by-line activity records.

•

dmesg displays Linux kernel messages.

•

top displays which programs are using most of the memory and CPU.

•

ps displays the running programs

•

pnio displays PROFINET IO activity

•

All log files start up automatically during the startup cycle. Each log file has a size limit of
100KB.

Note: Typically, log files are intended to be used by Technical Support in the event there is a

problem.

You can use the following procedures to:

•

•

14.4.1

View a Log File

Use this procedure to view a log file.

Open your browser and enter the IP address of the IO-Link Master.

Click Advanced and then LOG FILES.

Select the log file type from the drop-list.

Optionally, click the REFRESH button to get the latest information.

Optionally, export the log file.

Figure 106: Log Files

Summary of Contents for OMIOLM001






























































































































































Search results

Summary of Contents for OMIOLM001

Reviews:

Related manuals for OMIOLM001

Brands by name

Popular brands

Emerson OMIOLM001, User Manual

Search results

Summary of Contents for OMIOLM001

Reviews:

Related manuals for OMIOLM001

Brands by name

Popular brands