Configuring and operating the system
65
User Manual
UM6C55C (P7000597)
Lorain Power System (AP6C55CA/CB)
Standard 10.00 (March 2008)
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
active alarm in the system. The display activates automatically if an alarm
occurs, or if any button is pressed. The set shutoff time is shown in this
submenu.
To change the shutoff time, press CHNG. In the next screen, use the
and
buttons to choose a shutoff time or no shutoff. Save the setting by pressing
the APPL button.
5.5.7.9. Charge Control
This submenu is used to activate or deactivate the charge control function and
set its current limit. To activate or deactivate the charge control function,
press CHNG. In the next screen, press CHNG again to go to the charge
control/status screen, and then use the
and
buttons to activate or
deactivate the charge control function, and save the setting by pressing the
APPL button. To set the current limit, use the
and
buttons to select the
charge control/ limit screen, then press CHNG. In the charge control/limit
screen, use the
and
buttons to set the current limit between 0 and 300 in
increments of 1, and save the setting by pressing the APPL button.
5.5.7.10. Low Voltage
This submenu is used to set the battery on discharge (BOD) and low voltage
(LV) alarm threshold. To set the thresholds, press CHNG. In the next screen,
use the
and
buttons to go successively to the BOD and LV screens; in
each of the two screens, press CHNG, use the
and
buttons to set the
threshold (40.0 to 53.8 in increments of 0.1 for the BOD, 40.0 to 50.8 in
increments of 0.1 for the LV), then save each setting by pressing the APPL
button.
5.5.7.11. Temperature compensation
This submenu is used to activate or deactivate the temperature compensation
function and to set its operating parameters. To activate or deactivate the
charge control function, press CHNG. In the next screen, press CHNG again
to go to the activate/deactivate screen, and then use the
and
buttons to
activate or deactivate the temperature compensation function, and save the
setting by pressing the APPL button. To set the operating parameters, use the
and
buttons to go successively to the nominal temperature, number of
cells and cell factor screens; in each of the three screens, press CHNG, use
the
and
buttons to set the parameter (20 to 25°C in increments of 1, 23
to 40 cells in increments of 1, and 0 to 10 mV per cell per °C in increments of
1 mV), then save each setting by pressing the APPL button.
5.5.7.12. Battery test
This submenu is used to activate or deactivate the battery test function and to
set its operating parameters. To activate or deactivate the battery test
function, press CHNG. In the next screen, press CHNG again to go to the
activate/deactivate screen, and then use the
and
buttons to activate or
deactivate the battery test function, and save the setting by pressing the APPL
button. To set the operating parameters, use the
and
buttons to go
successively to the time, end voltage, limit and nominal battery capacity
Summary of Contents for Lorain CIP 48120 AP6C55CA
Page 2: ......
