126
Configuring and operating the system
UM6C55C (P7000597)
User Manual
Standard 10.00 (March 2008)
Lorain Power System (AP6C55CA/CB)
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Clicking on
SNMP Settings
in the submenu screen for System Manager CIP
settings will display the following screen.
Screen 55
System Manager CIP
System Manager CIP Only:
The Community Settings are configurable by
the user. To set a Community Setting, enter the new setting in its respective
box and confirm the new setting by clicking on the
button.
The System Manager CIP can manage up to 3 locations called Trap
Addresses.
To set the trap addresses, enter the new trap address 1, 2 and 3 in their
respective fields and confirm the new addresses by clicking on the
button in the applicable box.
Note 1:
To make a new trap address active, the System Manager CIP must
be restarted (Refer to section 5.6.6.13 Restart).
Note 2:
The Community Settings are imbedded in the System Manager
CIP and are the followings: Read: Public, Write: Private.
Summary of Contents for Lorain CIP 48120 AP6C55CA
Page 2: ......
