Communicating with the System Manager
IP
145
User Manual
UM6C55C (P7000597)
Lorain Power System (AP6C55CA/CB)
Standard 10.00 (March 2008)
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Figure 6.3 – Setting the System Manager CIP hardware switch
6.4.2. Ethernet
communication
If you use an Ethernet connection, you will have to enter the
IP
address,
Subnet Mask and Default Gateway of the System Manager CIP.
At initial installation, the factory defaults should be:
•
IP address –
192.168.0.1
•
Subnet Mask –
255.255.255.0
•
Default Gateway –
192.168.0.0
Note:
Once the installation is completed, it is suggested that the end user
replaces the default
IP
address, Subnet Mask and Default Gateway by his
own and that he enters these in the above box.
If the
IP
address, Subnet Mask and Default Gateway have been changed and
are unknown, proceed as follows:
•
If you are trying to logon directly to a System Manager CIP, the
IP
address, Subnet Mask and Default Gateway numbers are displayed in
the
IP
address screen of the STATUS menu (see Figure 5.7 in the
previous Chapter), which can only be accessed on the System Manager
CIP, not remotely. To display this screen, in the Home screen of the
LCD display on the System Manager CIP, click on the
STAT
button.
In the STATUS/ SYSTEM screen, press on the
button. In the
STATUS/IP ADDRESS screen, press on the
INFO
button. The
IP
address, Subnet Mask and Default Gateway screen will be displayed.
•
If you are trying to logon remotely, contact your network administrator
to obtain the latest
IP
address, Subnet Mask and Default Gateway.
Summary of Contents for Lorain CIP 48120 AP6C55CA
Page 2: ......
