manualshive.com logo in svg

Emerson Lorain CIP 48120 AP6C55CA, User Manual

The Emerson Lorain CIP 48120 AP6C55CA User Manual is a comprehensive guide designed to assist users in operating this exceptional product efficiently. With a simple download from our manualshive.com, you can access this manual free of charge, enabling you to make the most out of your Emerson Lorain CIP 48120 AP6C55CA purchase.

Share
Download
background image

Communicating with the System Manager

 IP

   

143

 

User Manual

 

UM6C55C (P7000597) 

Lorain Power System (AP6C55CA/CB) 

Standard 10.00 (March 2008) 

 

This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy 

Systems, North America, Inc.  Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited. 

• 

Verify first that your computer is equipped with a network card. 

• 

Connect the computer to the System Manager CIP with a crossover 

network cable (optional - A7000827); connect one end of the cable to 

the network card on the computer, and the other end to the RJ45 

Ethernet port on the front panel of the System Manager CIP. 

 

Note:

  Direct PC connection into the RS-232 serial port is not possible. To 

use the RS-232 serial port, a dial-up line must be used as described below. 

6.3.2. 

Remote Ethernet connection 

To access the RJ45 Ethernet port of the System Manager CIP from a remotely 

located PC, proceed as follows: 

• 

Verify first that your computer is equipped with a network card and 

that it is connected to a LAN or WAN network with an Ethernet cable. 

• 

Ensure that the RJ45 Ethernet port of the System Manager CIP is also 

connected to a LAN or WAN network with a straight Ethernet cable. 

• 

Check that your services, protocols and adapters are correctly installed 

and configured. If you are not sure how your computer is to be 

installed and configured, contact your network administrator for 

advice. The network connection to be used is an ordinary TCP/IP 

connection. 

• 

When accessing the System Manager CIP through a firewall, it is 

required to enable the following TCP/IP ports: 80 for the Web browser, 

5555 for the remote GUI, and 2121 for software upgrade. 

 

Note:

  If Explorer is used for the remote network connection, it is required 

to configure the Internet option to “Update every page as loaded” instead 

of “Automatic” in Settings, and to frequently do a right click and a Refresh 

in order to update the displayed page. This is not required if Netscape is 

used. 

6.3.3. 

Remote dial-up connection 

 

 

CAUTION

 

Protection the equipment against damages 

Before connecting a modem cable into the RS-232 connector 
of the System Manager CIP, ensure that the frame ground 
and/or BRR cable for the system is/are connected. 

 

To access the RS-232 serial port of the System Manager CIP from a remotely 

located PC, proceed as follows: 

• 

Verify first that your computer is equipped with a modem that is 

connected to a regular dial-up line. 

• 

Ensure that an external modem (optional) is connected to the RS-232 

serial port of the System Manager CIP and to a regular dial-up line. 

Summary of Contents for Lorain CIP 48120 AP6C55CA










































































































































































































Reviews:

No comments

Related manuals for Lorain CIP 48120 AP6C55CA

Eastwood 14041 Instructions preview
14041
Brand: Eastwood Pages: 5
Sealey SMS2008 Instructions preview
SMS2008
Brand: Sealey Pages: 3
Hilti TE705 Operating Instructions preview
TE705
Brand: Hilti Pages: 4
Senco DuraSpin DS275-18V Operating Instructions Manual preview
DuraSpin DS275-18V
Brand: Senco Pages: 56
Dahua Technology DH-PFM363L-D1 User Manual preview
DH-PFM363L-D1
Brand: Dahua Technology Pages: 28
Woodland Mills BANDSAW BLADE SHARPENER Operator'S Manual preview
BANDSAW BLADE SHARPENER
Brand: Woodland Mills Pages: 56
Parkside PHLG 600 Operation And Safety Notes preview
PHLG 600
Brand: Parkside Pages: 19
Embertec Emberstrip ESUSAV8-ET-10D User Manual preview
Emberstrip ESUSAV8-ET-10D
Brand: Embertec Pages: 21
PEUGEOT EnergyDrill-18V20 Manual preview
EnergyDrill-18V20
Brand: PEUGEOT Pages: 26
jcb 21-18JS Instructions & User'S Manual preview
21-18JS
Brand: jcb Pages: 20
Sieg AXMINSTER Model Engineer Series Original Instructions Manual preview
AXMINSTER Model Engineer Series
Brand: Sieg Pages: 28
OEM Tools 24495 Operating Instructions And Parts Manual preview
24495
Brand: OEM Tools Pages: 8
TDK-Lambda GENESYS 10KW Technical Manual preview
GENESYS 10KW
Brand: TDK-Lambda Pages: 74
Erbauer ERB096HTG Operating Instructions Manual preview
ERB096HTG
Brand: Erbauer Pages: 20
BE QUIET! BQT E9-400W User Manual preview
BQT E9-400W
Brand: BE QUIET! Pages: 51
Ultra Products X-Finity Series Specification Sheet preview
X-Finity Series
Brand: Ultra Products Pages: 1
Scheppach 5903818901 Instruction Manual preview
5903818901
Brand: Scheppach Pages: 120
SATA 96411 User Manual preview
96411
Brand: SATA Pages: 74

Brands by name

Popular brands

Load more brands