Liebert IntelliSlot Unity Card Web Page Layout
25
Liebert
®
IntelliSlot
®
Unity
™
Card
4.4
Unity Tab Menus
The Unity Tab shows the overall event status of the equipment and communication interface. It
contains logs of third party information, communications settings, third party protocol settings and
system status information as detailed below.
Table 4
Unity Tab menus
Unity Tab Menus
Description
See Details:
Active Events
Displays the current event activity
page 27
Downloads
Agent (or Unity Card) Logs
Event Logs
Data Logs
Other files
Downloading files to text-accessible, comma-
delimited or tab-delimited files ease
troubleshooting.
page 27
Configuration
System
User Settings
Network Settings
Web Server Settings
LIFE
Emerson Protocol
Messaging Settings
Displays information about the system setup,
access, network connections, Emerson
Protocol settings and whether e-mail and
SMS messaging are enabled
page 27
Protocols
Modbus
BACnet
SNMP
YDN23
Lists information and settings related to
available third-party protocols employed to
monitor equipment.
page 34
Status
System Status
System Restart Required
LIFE
™
device identity changed-LIFE
™
needs to
be reconfigured
RS-485 Port Conflict
Duplicate Emerson Protocol MSTP Node ID
Duplicate BACnet MSTP Node ID
Shows the overall condition of the system
and whether a restart is needed to activate
configuration changes; restart is performed
only from the Support Folder
page 42
Support
Agent time and Date
Agent Model
Agent App Firmware Version
Agent App Firmware Label
Agent Boot Firmware Version
Agent Boot Firmware Label
Agent Serial Number
Agent Manufacture Date
Agent Hardware Version
GDD Version
FDM Version
Product Sequence ID
Restart Card
Reset Card to Factory Defaults
(see
Note
below)
Generate and download diagnostic file
Firmware Update
Active Networking
Shows information needed for maintenance
or troubleshooting and shortcuts to reboot
the card, reset the Liebert IntelliSlot Unity
card to its factory defaults and to update the
card’s firmware.
page 43
(Firmware
Update also
on page 46)
NOTE
The card may be reset to factory defaults manually by briefly pressing the reset button five
times within 10 seconds.
Do not hold the reset button too long: Pressing the reset button and holding it for 5 seconds will
restart the card without resetting it to factory defaults.
To perform either function, insert a straightened paper clip into the small hole on the front of
the card (see
Figure 1
for the Reset Button’s location).
