manualshive.com logo in svg

Emerson Liebert IntelliSlot Unity-DP, User Manual

Share
Download
Emerson Liebert IntelliSlot Unity-DP User Manual Download Page 52

Firmware Updates

Liebert

®

 IntelliSlot

®

 Unity

™

 Card

48

6.2

Revert to Alternate Firmware

The Liebert IntelliSlot Unity card has two areas in flash memory for the firmware and the 

configuration. One area is currently operating on the card. The other area is considered an alternate.
When a card’s firmware is updated, the previous firmware and configuration are moved to the 

alternate area. The Liebert IntelliSlot Unity card allows returning to the firmware version and 

configuration that are kept in the alternate area.

1. Select the Unity Tab at the top of the screen.
2. Select the Support folder, then select the Update Firmware folder.
3. Select the 

Enable

 button.

4. Enter the user name and password in the security dialog box that appears; use the administrator 

user name and password from the user settings.

5. Click on the 

Run Alternate

 button and a confirmation dialog box will appear.

6. Click the 

OK

 button on the confirmation dialog box.

NOTE

Reverting to an alternate firmware version will not be possible if the currently operating 

firmware is the initial version loaded on the Liebert IntelliSlot Unity card. If the initially 

loaded firmware is still running on the card, the Alternate Version fields will be blank, and it 

will not be possible to revert to an alternate version.

NOTE

The card will reboot. After the reboot, the card will be running the previous version of the 

firmware and configuration, which had been stored in flash memory. The previous firmware 

and configuration will have been moved to the alternate area.

Summary of Contents for Liebert IntelliSlot Unity-DP

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands