Edit the Liebert IntelliSlot Unity Card Configuration
Liebert
®
IntelliSlot
®
Unity
™
Card
28
5.3.1 Configuration Folder—System
The System subfolder displays general information about the monitored and managed equipment and
the display of some data. Refer to
Figure 20
. The data displayed is set by the user and can assist in
troubleshooting. To alter the information displayed, click on the
Edit
button, enter the administrator
name and password and make changes. Click
Save
to save the changes; click
Cancel
to discard the
changes.
Figure 20 Configuration folder, System subfolder
Time Service Settings
The System Subfolder contains one folder: Time Service Settings. Each setting offers either a menu of
choices or an enable/disable check box. Users can set these parameters
Figure 21 Configuration folder, System subfolder,
Time Service Settings
• External Time Source—The external source to be used for time synchronization.
• NTP Time Server—Network Time Server (NTP) URL or IP address
• NTP Time Sync Rate—The rate at which time will be synchronized with the Network Time
Protocol server, if NTP is the external time source.
• Time Zone—Time zone where the device is located.
• Enable Auto-Sync to Managed Device—Enable automatic writing time to the managed device.
• Managed Device Auto-Sync Rate—Rate at which time will be written to the managed device, if an
external time source has been selected.
5.3.2 Configuration Folder—User Settings
The User Settings subfolder displays the administrator’s and general user’s name and password.
Each can be changed. The default user name and password for the administrator are
Liebert
and
Liebert
. The defaults for the general user are
User
and
User
. To change either, click on
Edit
, enter the
default username and password and enter the new information. Click on
Save
to accept the changes
or click
Cancel
to discard the changes.
Enter the information in the dialog boxes and choose
temperature display, either Celsius or Fahrenheit
