Emerson Liebert IntelliSlot Unity-DP User Manual Download Page 6

Page: 6 / 56

Introduction

Liebert

IntelliSlot

Unity

™

Card

1.0

NTRODUCTION

This Liebert IntelliSlot Unity platform delivers enhanced communication and control of AC Power,

Power Distribution and Thermal Management products. The platform communicates with Emerson

Network Power

software tools and services, including Trellis

, LIFE

™

Technology, Liebert SiteScan

Web

™

and Liebert Nform

The platform includes the Liebert IntelliSlot Unity DP

™

and Liebert IntelliSlot Unity LIFE

™

cards.

Each card employs the Emerson Protocol to monitor and manage a wide range of operating

parameters, alarms and notifications about the power, distribution and Thermal Management

equipment. The cards also communicate with Building Management Systems and Network

Management Systems.

Figure 1

Liebert IntelliSlot Unity-DP card features

1.1

Protocols

Each card supports the Emerson Protocol, Remote Service Delivery Protocol and HTTP Web by

default.
The Liebert IntelliSlot Unity DP supports selecting two third-party protocols; the Liebert IntelliSlot

Unity LIFE card supports the default protocols only (Emerson Protocol, Remote Service Delivery

Protocol and HTTP Web).
Available protocols are

• BACnet IP—BACnet over Internet Protocol
• BACnet MSTP—BACnet Master-Slave/Token-Passing (MSTP) communications protocol over a

RS-485 serial network (also known as BACnet MSTP RS-485)

• Modbus RTU—Modbus Remote Terminal Unit (RTU) communication protocol over a RS-485

serial network (also known as Modbus RTU RS-485)

• Modbus TCP—Modbus Transmission Control Protocol over Internet Protocol (also known as

Modbus TCP/IP)

• SNMP
• YDN23 - YD-T-1363 specification protocol (also known as YD/T 1363)

Activity

Link

485

IS-UNITY-DP

Liebert Sensor Network

(future release)

RJ-45-Ethernet—HTTP; Modbus TCP;

BACnet IP; SNMPv1, v2c, v3;

Emerson Protocol

Reset

Button

(Reboot or

reset to

factory

defaults)

BACnet MSTP

Modbus RTU

YDN23

Micro-USB AB

(future release)

Summary of Contents for Liebert IntelliSlot Unity-DP

























































Search results

Summary of Contents for Liebert IntelliSlot Unity-DP

Reviews:

Brands by name

Popular brands

Emerson Liebert IntelliSlot Unity-DP, User Manual

Search results

Summary of Contents for Liebert IntelliSlot Unity-DP

Reviews:

Brands by name

Popular brands