manualshive.com logo in svg

Emerson Liebert IntelliSlot Unity-DP, User Manual

Share
Download
Emerson Liebert IntelliSlot Unity-DP User Manual Download Page 45

Edit the Liebert IntelliSlot Unity Card Configuration

41

Liebert

®

 IntelliSlot

®

 Unity

™

 Card

5.8.4 SNMPv1/v2c Access Settings

This page contains settings for network hosts that can access data using SNMPv1/v2c. Up to 20 

access hosts can be enabled and configured. Like the SNMPv3 pages, the setting for each host may be 

reached by clicking on the links in the data portion of the page or by clicking on the folders for the 

access hosts. Also, data shown in the table may be changed by clicking on the link above the table.

SNMPv1/v2c Access Settings

• SNMP Access IP Address—Configure network hosts interested in device information access. The 

host can be identified as either an IP address or the host’s network name

• SNMP Access Type—SNMPv1/v2C access type: Read Only or Read/Write
• SNMP Access Community String—SNMP Community String

Click on a SNMPv1v2c 

Access Settings folder or a 

link to get this settings page.

Click on this link to change 

the information shown in the 

table on this page to the 

information shown below.

Summary of Contents for Liebert IntelliSlot Unity-DP

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands