Enable Communication Protocols
Liebert
®
IntelliSlot
®
Unity
™
Card
18
Figure 12 SNMPv3 user settings
Configure SNMPv1 Trap Settings
1. Select Unity Tab > Protocols > SNMP > SNMPv1 Trap Settings (20).
2. Click on
Edit
and enter a User name and password if required.
3. Enter the information and set the permissions appropriate to the user. Refer to
Figure 13
for the
information required.
4. Click
Save
to confirm the changes or click on
Cancel
to discard them.
5. Repeat
Steps 1
through
4
for any additional users.
6. Restart the card to confirm the changes.
a. Select the Unity Tab > Support.
b. Enable the commands.
c. Click on
Restart
.
Settings are
required for
each user
