manualshive.com logo in svg

Emerson Liebert IntelliSlot Unity-DP, User Manual

Share
Download
Emerson Liebert IntelliSlot Unity-DP User Manual Download Page 7

Introduction

3

Liebert

®

 IntelliSlot

®

 Unity

™

 Card

1.2

Compatibility With Other Emerson Products and Communication Protocols

The Liebert IntelliSlot Unity platform includes:

The Liebert IntelliSlot Unity-DP platform supports the following protocols:

The Liebert IntelliSlot Unity platform supports both 10Mbit and 100Mbit communication speeds and 

either half or full duplex.

Password Protection

Control and configuration capabilities are protected by an administrator’s username and password 

combination. Optionally, status information can be password-protected. The default user name for the 

administrator is 

Liebert

 and the default password is also 

Liebert.

The user name and password can be changed with the Web interface. See 

2.2 - Change User Names 

and Passwords Immediately

 for details.

SNMP Support

The Liebert IntelliSlot Unity card enables SNMP management of Liebert equipment. To integrate the 

card into a SNMP implementation, import or compile the Liebert Global Products MIB on the 

network management station (NMS).
The Liebert Global Products MIB is available at Liebert’s Web site (

www.liebert.com

); it supports 

both Windows

®

 (192436P1) and Unix (192435P1) file formats.

Web Support

The Liebert IntelliSlot Unity card delivers Web management and control to Liebert equipment over 

HTTP and HTTPS. All authorized users on your network will be able to view status information.

Modbus TCP and Modbus RTU Support

The Liebert IntelliSlot Unity card supports Modbus TCP and Modbus RTU for the full range of 

information available from the managed device. The Modbus protocol mapping document, SL-28170, 

is available at Liebert’s Web site: 

www.liebert.com

BACnet IP and BACnet MSTP Support

The Liebert IntelliSlot Unity card supports BACnet IP and BACnet MSTP for the full range of 

information available from the managed device. The BACnet protocol mapping document, SL-28170, 

is available at Liebert’s Web site: (

www.liebert.com)

. This document includes the BACnet Protocol 

Implementation Conformance Statement (PICS) document as a guide to implementing the BACnet 

protocol.

Table 1

Compatibility with Liebert equipment

Liebert IntelliSlot Card

Compatible with:

Liebert IS-UNITY-DP

Liebert IS-UNITY-LIFE

Liebert APM

™

, Liebert APS

™

, Liebert CRV

™

, Liebert CW

™, 

Liebert Challenger 3000

™

 

Liebert DCP

™

, Liebert Deluxe System/3

™

, Liebert DS

™

, Liebert DSE

™

, Liebert HPC

™

Liebert HPC-S/M/R/W/Generic

™

, Liebert HPM

™

, Liebert NXC

™

, Liebert NXL

™

 *, 

Liebert NXR

™

, Liebert PCW

™

/PDX

™

, Liebert PeX

™

 *,

 

Liebert XDC

™

, Liebert XDP

™

, Liebert 

XDP-Cray

™

Table 2

Liebert IntelliSlot card communication protocols

Liebert IntelliSlot

Card (Part #)

Communication Protocols Available

HTTP

HTTPS

Emerson

Protocol

Remote

Service

Delivery

Protocol

Email

SMS

SNMP

v1,v2c, v3

BACnet IP

BACnet MSTP

Modbus TCP

Modbus RTU

YDN23 *

Liebert IS-UNITY-DP

(IS-UNITY-DP)

✔

✔

✔

✔

✔

✔

✔

✔

✔

Liebert IS-UNITY-LIFE

(IS-UNITY-LIFE)

✔

✔

✔

—

—

—

—

—

—

*

YDN23 applicable only to Liebert PeX and Liebert NXL.

Summary of Contents for Liebert IntelliSlot Unity-DP

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands