1592015610 User manual IC200D EVO GB rel1.0 10.11.2015_rev10
IC200D
29/192
10.3 PROBES VISUALIZATION
Press
key to visualize the value of the probes configured in the Ichill (press
or
to visualize all the probes).
10.4 VISUALIZATION / MODIFICATION OF THE SET POINT
Press
key to read the value of the set point (cooling set point if the Ichill is in cooling mode, heating
set point if the Ichill is in heating mode, cooling and hating set point if the Ichill is in STD_BY or remote OFF,
Domestic hot water when enabled).
It is also possible to read the status of the Energy saving, the status of the Dynamic set point and the real
value of the set point if the Energy saving or Dinamic set point are active.
To modify the set point (Cooling, Heating or Domestic hot water):
press
or
to select the value of the set point
press
press
o
to modify the value
press
to confirm the operation
10.5 ALARM VISUALIZATION
Press
key to read the alarm status; the alarm status can be:
