Emerson Daniel Danalyzer 1000, Hardware Reference Manual

Page: 161 / 320

MODEL 1000
SEP 2005
OPERATION FROM LOCAL KEYPAD AND DISPLAY
4-11
4.2.4 Editing Procedures
For editing, follow these guidelines
:
(1) Move through menu
items or data fields Scroll through the menu sequence to the desired data
by pressing ENTER after each correct or unchanged
term or value. Also use direction arrows. Pressing
ENTER without first entering data causes the
Controller to skip to the next item.
(2)
View off screen menu
items
The menu displays eight lines. Use the DOWN
ARROW key to move to a submenu below the last
item shown on a menu when necessary.
(3)
Go to a particular menu
item
To get into a particular menu, scroll down to the menu
and press ENTER or press the number of the menu.
The menus work like a tree with the submenus
branching for their particular functions.
(4) Return to initial screen Exit the editing procedure and save your changes by
pressing the ESC key as many times as necessary to
return to the initial screen.
(5) Save changes After editing changes are completed, press the ENTER
or ESC key. The query "Write Changes ?" will
appear.
-
Toggle the SPACE key to answer yes or no.
- Press the ESC key to save any parameter
changes and return to the preceding menu.
- Press ENTER to save a changed or new item
and move to the next item on a menu.
(6) Correct a mistake If the wrong numeric key has been pressed during
insertions, press the BKSP key to back up and delete
the item, then enter the new value. Move the cursor to
an item and press the DEL key to delete an item.
(7)
Enter data for multiple
streams
After entering an item, for example on stream one,
press NEXT to save the item and skip to the next
sequence (stream two).