Emerson Affinity, User Manual

Page: 192 / 274

Safety
Information
Product
Information
Mechanical
Installation
Electrical
Installation
Getting
Started Basic
parameters
Running
the motor
Optimization
SMARTCARD
operation
PC tools
Advanced
parameters
Technical
Data
Diagnostics
UL Listing
Information
192
Affinity User Guide
www.controltechniques.com Issue Number: 5
Parameter
Range(
Ú
) Default(
Ö
)
Type
OL RFC OL RFC
14.01
PID 1 control output
±100.00 %
RO Bi NC PT
14.02
PID 1 main reference source
Pr 1.00 to Pr 50.99 Pr 0.00
RW Uni PT US
14.03 PID 1 reference source RW Uni PT US
14.04 PID 1 feedback source RW Uni PT US
14.05 PID 1 reference invert
OFF (0) or On (1) OFF (0)
RW Bit US
14.06 PID 1 feedback invert RW Bit US
14.07 PID 1 reference slew-rate limit 0.0 to 3,200.0 s 0.0 RW Uni US
14.08 PID 1 enable OFF (0) or On (1) OFF (0) RW Bit US
14.09 PID 1 optional enable source Pr 1.00 to Pr 50.99 Pr 10.01 RW Uni PT US
14.10 PID 1 proportional gain
0.000 to 4.000
1.000 RW Uni US
14.11 PID 1 integral gain 0.500 RW Uni US
14.12 PID 1 derivative gain 0.000 RW Uni US
14.13 PID 1 output upper limit 0.00 to 100.00 % 100.00 RW Uni US
14.14 PID 1 output lower limit ±100.00 % -100.00 RW Bi US
14.15 PID 1 output scaling 0.000 to 4.000 1.000 RW Uni US
14.16 PID 1 output destination Pr 1.00 to Pr 50.99 Pr 0.00 RW Uni DE PT US
14.17 PID 1 hold integrator enable
OFF (0) or On (1) OFF (0)
RW Bit NC US
14.18 PID 1 symmetrical limit enable RW Bit US
14.19 PID 1 main reference
±100.00 %
RO Bi NC PT
14.20 PID 1 reference RO Bi NC PT
14.21 PID 1 feedback RO Bi NC PT
14.22 PID 1 error RO Bi NC PT
14.23 PID 1 reference scaling
0.000 to 4.000 1.000
RW Uni US
14.24 PID 1 feedback scaling RW Uni US
14.25 PID 1 digital reference
±100.00 %
0.00
RW Bi NC
14.26 PID 1 digital feedback RW Bi NC
14.27 PID 1 optional enable source parameter 2 0.00 to 50.99 RW Uni PT US
14.28 PID 1 pre-sleep boost level 0.00 to 100.00 % RW Uni US
14.29 Maximum boost time 0.0 to 250.0 s 0.0 RW Uni US
14.30 PID 1 pre-sleep boost level enable OFF (0) or On (1) RO Bit NC PT US
14.31 PID 2 output ±100.00 % RO Bi NC PT
14.33 PID 2 reference source
Pr 0.00 to 50.99 Pr 0.00
RW Uni PT US
14.34 PID 2 feedback source RW Uni PT US
14.35 PID 2 reference invert
OFF (0) or On (1) OFF (0)
RW Bit US
14.36 PID 2 feedback invert RW Bit US
14.37 PID 2 reference slew-rate limit 0.0 to 3,200.0 s 0.0 RW Uni US
14.38 PID 2 enable 0 to 2 0 RW Uni US
14.40 PID 2 proportional gain
0.000 to 4.000
1.000 RW Uni US
14.41 PID 2 integral gain 0.500 RW Uni US
14.42 PID 2 derivative gain 0.000 RW Uni US
14.43 PID 2 output upper limit 0.00 to 100.00 % 100.00 RW Uni US
14.44 PID 2 output lower limit ±100.00 % -100.00 RW Bi US
14.45 PID 2 output scaling 0.000 to 4.000 1.000 RW Uni US
14.46 PID 2 output destination Pr 1.00 to Pr 50.99 Pr 0.00 RW Uni DE PT US
14.47 PID 2 hold integrator enable
OFF (0) or On (1) OFF (0)
RW Bit NC US
14.48 PID 2 symmetrical limit enable RW Bit US
14.50 PID 2 reference
±100.00 %
RO Bi NC PT
14.51 PID 2 feedback RO Bi NC PT
14.52 PID 2 error RO Bi NC PT
14.53 PID 2 reference scaling
0.000 to 4.000 1.000
RW Uni US
14.54 PID 2 feedback scaling RW Uni US
14.55 PID 2 digital reference
±100.00 % 0.00
RW Bi NC
14.56 PID 2 digital feedback RW Bi NC
14.58 PID 1 Feedback output scaling 0.00 to 4.000 1.000 RW Uni US
14.59 PID mode selector 0 to 7 0 RW Uni US
14.60 PID 1 Square root enable
OFF (0) or On (1) OFF (0)
RW Bit US
14.61 PID 2 Square root enable RW Bit US
14.62 Combined square root enable RW Bit US
RW Read / Write RO Read only Uni Unipolar Bi Bi-polar Bit Bit parameter Txt Text string
FI Filtered DE Destination NC Not copied RA Rating dependent PT Protected US User save PS Power down save