ELZAB Eco Print, Operator'S Manual

Page: 20 / 47

ELZAB S.A.

+48 32 272 20 21
www.elzab.pl
16
To display the first line of the item name again, press the key .
The both lines with an item name, if they do not fit the display, can be scrolled to the right and to the left with
the keys and . Keep these keys pressed for more than one second to scroll the lines to the very end and to the
very beginning.
2.1.1 Calling Up Items by PLU or Code
To select an item by the PLU number or the code number, do the following:

The display tag PLU must be off, unit price value must be zero, otherwise press the key to discard
item selection, or the key to delete unit price value.

To select an item by the PLU number, enter its PLU number with the numeric keys and press – the
scale will find an item, display its unit price and the first line of its name; the tag PLU will turns on.

To select an item by its code number, enter the code number with the numeric keys and press . The
scale will first display a message “Searching...”, and then, if the scale succeeds to find the requested item,
it will display the unit price and the name of the selected item; the tag
PLU will turn on. If the scale fails
to find the requested code, the scale will emit an error beep and display a message “Item not found!”.
NOTE. The PLU number and the item code number are different notions. The PLU number is a number of a memory
slot in the internal memory storage of the scale. The item code is a unique identifier of an item, stored in the scale
memory along with other characteristics of this item like its unit price, name, etc. When selecting an item by its code,
the scale is searching its memory for the first item with the requested code. If for some reason there is more than one
item with the same code number in the scale memory, the scale returns an item with the smallest PLU number.
2.1.2 Item Search Mode
Item Search Mode provides for browsing items stored in the PLU memory of the scale. Press the key to
enter Item Search Mode:

If any item has already been selected (the display tag PLU is on), the browsing begins with the selected
item.

If no item has been selected (the display tag PLU is off) and no unit price has not been entered, the
browsing begins with the item with the PLU number “1”.
In Item Search Mode, the scale shows PLU and code numbers of the items in the first line of the display and a
item name or unit price in the second line of the display (see Illustration 15 below):
Illustration 14