ELZAB Eco Print
Operator's Guide
31
To enter the first 12 digits of an arbitrary bar code (BC), use the numeric keys
..
. The last digit of the
BC will be automatically calculated by the scale. Use the key
to delete the last entered digit, if the blinking cursor
is in the end in the line. Move the cursor to the left and to the right with the keys
and
and edit the digit
highlighted by the blinking cursor with numeric keys. Keeping the key
pressed clears all digits of the arbitrary bar
code. To confirm setting an arbitrary bar code value, press the key
. To quit Arbitrary Bar Code Input Mode without
saving the changes, press the key
.
It is possible to input the value of the arbitrary bar code from the bar code scanner connected to the scale. In
Arbitrary Bar Code Input Mode, read the sample bar code with the scanner instead of entering its digits with numeric
keys. Depending on the settings of the scanner, it will read the sample bar code immediately upon pointing the laser
beam at it or after pressing the scan button on the scanner. Contact the system administrator to check how exactly
your scanner is programmed to operate. The sample bar code transmitted to the scale (its first 12 digits) will be
indicated in the second line of the display of the scale.
The entered arbitrary bar code can be used as long as an item is selected. Deselecting an item will discard the
entered arbitrary bar code. The arbitrary bar code is not stored in the PLU data of an item, so selecting an item with an
arbitrary bar code was entered sometime before will not automatically call up that arbitrary bar code, and the scale
will print bar codes formed according to the structure programmed in its settings.
2.9.10 Other Additional Functions
Quick access keys (refer to paragraph 1.3 Quick Access Keypad) can be programmed by the system
administrator to execute other functions, e.g. to adjust the print contrast, to change the media type (label paper or
receipt paper), to enable/disable label stripping sensor, change label format, turn on/off Prepacking Mode, etc. When
executing some of these functions that modify scale parameters (e.g. print contrast or label format), the scale does not
display any messages, thus to control the results of executing these functions it is required to perform a corresponding
action (for the example given above – to print a label and check its contrast and format).
Contact the system administrator to learn how quick access keys are programmed. Default value for all quick
access keys is the same – “No functions”.
2.10 Advertisement Text
The system administrator can enable the automatic displaying of the advertisement text. If an operator has not
been performing any actions with the scale for 5 minutes (i.e. has not been weighing products or pressing any keys),
the scale will show in the lower line of the display a scrolling text programmed by the system administrator. Pressing
any key or changing the weight on the platter/pan will automatically turn off Advertisement Text Mode.
Illustration 22
Summary of Contents for Eco Print
Page 4: ......
