ELZAB Eco Print
Operator's Guide
21
the quantity equals to “1”);
The display tag
PCS
will turn on confirming that the scale is in Quantity Editing Submode;
Using the numeric keys
..
enter the quantity of a non-weight product;
To change unit price, again press the key
: the display tag
PCS
will turn off confirming that it is
possible to enter a new unit price with the numeric keys. In Non-Weight Item Mode the key
is used
to switch between Quantity Editing and Price Editing Submodes;
To quit Non-Weight Item Mode, press the key
.
The scale automatically enters Non-Weight Item Mode and the display tag
PLU
turns on, once a non-weight
item preset in the PLU memory of the scale is selected (refer to paragraph 2.1 Selecting Items). To enter quantity and
override unit price values, use numeric keys
..
. The key
switches between Quantity Editing and Price
Editing Submodes. Unit price overriding can be disabled by the system administrator. To automatically quit Non-Weight
Item Mode, discard the selected item by pressing the key
.
2.5 Printing Labels
The scale allows to print several types of labels. Standard label is used for labeling products that are being
packed in store or have already been prepackaged (refer to paragraph 2.5.1 Standard Labels). Grand totals label
contains information accumulated in the grand totals memory (refer to paragraph 2.7 Grand Totals Memory).
2.5.1 Standard Labels
To print a standard label, use the key
. Textual and graphic information printed on a standard label, as well
as its arrangement are programmed by the system administrator.
Important!
In all scale models except for SHTRIH-PRINT PV design, as a label has been printed and fed out of the printer,
it is recommended to remove it with a hand movement from right to left rather than pulling it or detaching it in the
direction from left to right. In SHTRIH-PRINT PV model, due to a different mechanism, as a label has been printed and
fed out of the printer, it is recommended to remove it by pulling the label towards the operator. These methods provide
the easiest and smoothest way of removing printed labels.
Important!
Always control the quality of printed labels containing data like weight, unit price, product cost, and a bar
code. The black and white stripes of a bar code must be clear, sharp, and without defects. Otherwise contact the system
administrator. If the bar code integrity control line is enabled by the system administrator, always make sure that this
line above the bar code is solid, without gaps and white dots, otherwise report to the system administrator.
To print a label, several conditions must be fulfilled:
1.
The calculated cost must be greater than zero.
Operating with a weight item: the cost will be calculated, if the display tag
FIX
is on. It means that the
weight on the platter/pan has been measured, its value is within Min and Max, and the unit price has
been set.
Operating with a non-weight item: quantity and unit price must be set.
2.
If a label is to be printed for a weight item in the automatic mode, the weight value of the product should
be greater than the autoprinting threshold. Refer to paragraph 2.6. Automatic Label Printing for details.
Summary of Contents for Eco Print
Page 4: ......
