ELZAB Eco Print, Operator'S Manual

Page: 24 / 47

ELZAB S.A.

+48 32 272 20 21
www.elzab.pl
20
weight and will be removed – the display tag ZERO will turn on. The operator can then add a new product to the tare
and calculate its cost. The quantity of tare-out operations is unlimited. The total tare weight should not exceed the Tare
Max Weight value indicated on the special sticker under the display.
2.3.2 Keying in Tare Weight with Numeric Keys
If it is impossible to measure tare weight on scale (for example, an item is packed with the tare), but its value
is known in advance, a scale operator can key in tare weight value with the numeric keys:

Make sure that the platter/pan is empty;

If the display tag ZERO is off, press the key – the tag ZERO will turn on;

If the display tag REG is off, turn it on by pressing the key ;

Press the key – a prompt to enter tare weight value will appear on the display;

Key in tare weight value with the numeric keys .. and press . The entered tare weight value
will be displayed with the negative sign; the display tags ZERO and NET will turn on;

Place an item to be weighed along with the tare on the platter/pan and do the measurement.
2.3.3 Automatic Selection of Preset Tare Weight from PLU
The scale is designed to automatically use a non-zero preset tare weight value of an item, stored in the PLU
memory of the scale and called in one of the ways described in paragraph 2.1 Selecting Items. Thereby, the scale will
display the net weight of the called up item and turn on the tag
NET . Discarding a PLU item will drop the automatically
selected preset tare weight value of that item.
NOTE. If tare weight value has been entered by weighing it on the scale or by keying it in from with numeric keys (i.e.
not automatically by calling up a PLU with a preset tare weight), then the next called up PLU item with a preset tare
weight value will not override the non-automatically selected tare weight value, and the scale will return an error
message “Tare not set!”. Discarding a PLU item will not drop the non-automatically entered tare weight value, because
it is not bound to item data in the PLU memory of the scale.
2.4 Non-Weight Items
Non-Weight Item Mode is specially designed for operation with non-weight items. Operating procedures in
Non-Weight Item Mode differ from those of Weight Item Mode in using item quantity instead of item weight. Item
quantity can be modified by the scale operator.
To enter Non-Weight Item Mode and work with a non-weight product not stored in the scale memory, do the
following:

Make sure that the platter/pan is empty;

If the display tag ZERO is off, press the key – the tag ZERO will turn on;

Key in unit price (refer to paragraph 2.2 Unit Price);

Press the key . The scale will display quantity of a product in pieces instead of its weight (by default