_________________________________________________________________________________
_________________________________________________________________________________
84
Universal Network Terminal TAU-32M.IP
At a temperature from any of the submodules, which exceeds the temperature threshold by 15 °C,
the fans turn on by 7/8 revolutions.
At a temperature from any of the submodules, which exceeds the temperature threshold by 20 °C,
the fans turn on by full speed.
On long lines, not all telephones connected to the FXS ports will work correctly in pulse dialing
mode.
To apply changes, click the
Submit Changes button.
To discard all changes made to configuration, click the
Undo All Changes button.
To store changes to non-volatile memory of the device, click the
Save
button.
5.1.2.2
The 'SIP/H323 Profiles' submenu
In the
'SIP/H323 Profiles'
submenu, you may configure SIP profiles and H.323 protocol. You may organize
gateway operation with multiple carriers by configuring various SIP profiles on subscriber ports.
5.1.2.2.1
The SIP Common Parameters submenu (SIP Common)
In
'SIP Common'
tab, you may configure common SIP protocol parameters applied to all profiles.
SIP
(Session Initiation Protocol) is a signalling protocol, used in IP telephony. It performs basic call
management tasks such as starting and finishing session.
Addressing in SIP network based on SIP URI scheme:
sip:user@host:port;uri-parameters
where:
user
–number of a SIP subscribe;
@
–separator located between the number and domain of a SIP subscriber;
host
–domain or IP address of a SIP subscriber;
port
–UDP port used for subscriber's SIP service operation;
uri-parameters
–additional parameters.
One of the additional SIP URI parameters: user=phone. When this parameter is used, SIP subscriber number
syntax should match TEL URI syntax described in RFC 3966. In this case, TAU-32M.IP will not clear-back calls, if SIP
subscriber's number contains the following characters: '+', ';', '=', '?'. Allows you to receive calls that have a “+” in
front of the number.