_________________________________________________________________________________
_________________________________________________________________________________
Universal Network Terminal TAU-32M.IP 103
5.1.2.2.5
Routing and Pickup Code Configuration (Profile n/Dialplan)
In the
'Profile n/Dialplan'
submenu, you may configure prefixes for routing and pickup groups for each profile.
Routing
of the TAU-32M.IP gateway is based on prefixes. Prefix is the first part of the callee number, and
when it is combined with the quantity of digits of a dialed number and the dialling timeout, it comprises the routing
rule. If a number dialed by the subscriber falls within the scope of a single rule, the call will be routed by this rule. If a
dialed number falls within the scope of multiple rules, the call will be routed by the rule with the highest priority.
When dialed number does not match any rules, busy tone will be played to the subscriber.
When SIP-proxy operates in
outbound
mode, all calls are routed via SIP-proxy; configuration of prefixes is
optional in this case. In the absence of prefixes, the quantity of digits in the dialed number is not limited, and the
end of dialling occurs on the expiration of 'outbound' timer, or on '#' button pressed (in case when Stop dial at #
function is enabled on subscriber port). If you have to use
outbound
mode without the wait for the end of dialling on
'outbound' timer, you will have to configure prefixes.
Pickup group
– subscriber group, authorized to receive (or intercept) any calls directed at another subscriber
of the group.
Dialplan Table
– table of routing prefixes' settings; for parameter description, see Section 5.1.2.2.5.1
Regular Expression Dialplan
–configuration of routing prefix through regular expressions, description of regular
expressions format is given in Section 5.1.2.2.5.4.
After implementation of changes, click the
Submit Changes
button; to discard all changes
,
click the
Undo All
Changes
button; to save changes, click the
Save
button.