_________________________________________________________________________________
_________________________________________________________________________________
80
Universal Network Terminal TAU-32M.IP
STUN server address
– STUN server IP address or domain name;
STUN server port
– STUN server UDP port (3478 by default);
Minimum keep alive period, seconds and Maximum keep alive period, seconds –
define the
time interval in seconds for periodic transmission of messages to STUN server for public
address discovery and modification;
Public address (Manual)
– manual mode, when public address is explicit in configuration; in this
mode, you should add a forwarding rule on a device that acts as a NAT for TCP port used by TR-069
client. When the manual mode client ('Manual') is selected, the public client address should be
specified manually:
NAT address – IP address of a public NAT.
Off
–NAT will no be used–this mode is recommended only when the device is directly connected to
ACS server without network address translation. In this case public address will match local client
address.
To discard all changes made to configuration, click the
Undo All Changes button.
To apply changes, click the
Submit Changes
button.
5.1.1.12
The 'Autoupdate' submenu. Automatic update configuration
Autoupdate Settings:
–
Enable autoupdate
– when checked, device configuration and firmware will be updated automatically;
–
Source
– parameter obtaining method for autoupdate procedure:
DHCP (VLAN 1, VLAN 2, VLAN 3)
– receive autoupdate parameters via DHCP Options 66 and 67;
Static
– use autoupdate parameters specified in TAU-32M.IP configuration.
–
Autoupdate protocol
– a protocol, which will be used for autoupdate (TFTP/FTP/HTTP/HTTPS);
–
Autoupdate auth
– when checked, authentication settings will be used during autoupdate procedure;