. . . . .
P R I N T E D C I R C U I T B O A R D S P E C I F I C A T I O N
Adjusting the Width of the Optional Pin Chain Conveyor
2-9317-372-00-0
Bravo™ 8105 Programming and Operations Guide
5-61
Section B: Optional Pin Chain Conveyor
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Width of the Optional Pin Chain Conveyor
Introduction
The optional Pin Chain Conveyor is equipped with a standard Manual Width
Adjust function. It is a mechanical adjustment of the rear rail through the use of a
crank.
An optional software controlled Motorized Width Adjust is available with the
optional Pin Chain Conveyor. It moves the rear rail through the use of a motor.
Photograph
Figure 5–1 depicts the optional Combination Conveyor consisting of the standard
Mesh Belt Conveyor and the Pin Chain Conveyor.
Figure 5–1
Manually Adjusting the Pin Chain Conveyor
Introduction
The manual adjustment is performed using a hand crank at the front Load End of
the machine. Refer to the following section.
CAUTION
Do not adjust the width of the rails while the conveyor is running. Doing so may
affect machine function by damaging gears or other components.
