M A I N T / D I A G S C R E E N S
Buzzer / Lamp Test
10-110
Bravo™ 8105 Programming and Operations Guide
Rev. 2
1 0
Buzzer / Lamp Test
Description
The Buzzer / Lamp Test confirms that the Buzzer and Light Tower work properly.
Access the test window by selecting Maint / Diag > Buzzer / Lamp Test from the
menu bar at the top of the screen.
To test either one of them, press the applicable button on the Buzzer / Lamp Test
Window. A red indicator signals that the test is in progress. Refer to Figure 10–6.
•
If Buzzer Test is selected, a Buzzer sounds.
•
If Light Tower Test is selected, the three (3) lamps in the Light Tower illu-
minate.
Software Screen
Figure 10–6
Clear All PCBs
Description
Selecting Maint / Diag > Clear All PCBs resets the “Board in Machine” count to
zero (0). This is useful if the photocell is inadvertently triggered when no boards
are in the machine.
