C O N F I G U R A T I O N S C R E E N S
Options Configuration
9-92
Bravo™ 8105 Programming and Operations Guide
Rev. 2
9
Options Configuration
Introduction
Access the Options Configuration screen by selecting Configure > Options from
the menu bar at the top of the screen. The Programmable Output Relays and the
Light Tower are both accessed for configuration through the Options
Configuration Screen.
Software Screen
Figure 9–3
Conveyor
•
Select Pin Chain or Combo anytime a rail conveyor is installed. A Combo
Conveyor has both a Pin Chain and a Mesh Belt Conveyor System.
•
Fine Mesh Belt refers to the semiconductor mesh belt conveyor. It is a
finer pitch than the standard ¼ in. Mesh Belt Conveyor.
Machine
•
Inerting refers to a machine that uses nitrogen in its process environment.
•
IFM is the Internal Flux Management system. It is most often used with
inerted machines.
•
Extended Cooling refers to an additional Cooling Zone. This parameter is
used by the optional Unload (Exit) Photocell for accurate measurement.
Rail
•
Rail Heaters are used with the optional Pin Chain Conveyor for tighter pro-
filing.
•
Motorized Width Adjust controls the width of the Pin Chain Conveyor
through the software.
•
Analog Width Sensor is always present when the Motorized Width Option
is installed. It may also be installed independently to accurately display the
conveyor width in the machine software.
