R E C I P E S
Creating, Editing and Changing Recipes
6-68
Bravo™ 8105 Programming and Operations Guide
Rev. 2
6
Editing a Recipe
Ensure that the desired recipe is selected in the Recipe Select drop down window.
• Edit the Recipe as desired
• Press the Save button at the bottom of the screen to save the new parame-
ters.
The following parameters are saved to a Recipe:
• · Conveyor Speed
• · PCB Length
• · PCB Multiplier
• · Relative Board
• · Rail Width
• · Blower Settings
• · Heating Zone Settings
Loading a Different
Recipe
In the Recipe Editor, select a recipe by clicking on the triangle to the right of the
drop down menu under "Recipe Select". Select the desired recipe and click on it
to load it into the Recipe Editor. Refer to Figure 6–2.
Software
Representation
Figure 6–2
Loading a Different
Recipe (Continued)
The Recipe is not active until the "Load Recipe" button is selected at the bottom
of the screen.
If it is desired to edit the recipe, but not make it the active recipe, select and edit
the recipe, then click on the Save button. Refer to Figure 6–3.
Creating a New Recipe
Press the Recipe Button at the top of the screen or press Function Key F7. In the
Recipe Editor, enter a new name in the Recipe Name field.
Modify the parameters as desired and select the Save button from the bottom of
the screen. The recipe is saved under the new name. Refer to Figure 6–3.
Software
Representation
Figure 6–3
