Electrohome VistaGRAPHX 2500 User Manual Download | Manualshive

Page: 52 / 101

background image

OPERATION

VistaGRAPHX 2500 User's Manual

3-29

Baud Rate
This setting determines the speed of communications when
you are controlling the projector with an external device such
as a computer or another projector via an RS-232 port. The
projector baud rate must be set to match the baud rate of the
controlling device (default = 9600). If you are unsure about
what baud rate to assign, refer to the documentation for the controlling device.

NOTE: 1) The baud rate setting does not affect the switcher port, which remains
at 9600. 2) See 2.9, Serial Port Connections and Appendix D for more
information about cable connections between devices.

Front IR Keypad / Back IR Keypad
An IR remote keypad is either a Protocol "A" keypad (the original setting at
manufacture) or a Protocol "B" keypad. Either protocol may or may not be
recognized by the two sensors on the projector (front and
back), depending on what option you choose here. If the two
sensors are both on, they will recognize the same protocol
(either Vista A or Vista B) — changing an option for one
sensor automatically changes the other to match. If you want
only one sensor to respond to a particular protocol (either
Vista A or Vista B), disable the other sensor by setting its
protocol to OFF.

IMPORTANT

You can disable the current IR keypad.

Keep at All Vista until you are sure of

the current keypad protocol.

NOTE: Keypads are set at manufacture to "Protocol A". See 2.10, Keypad
Protocols for information about setting keypad protocols.

Wired Keypad
A wired keypad is either a "Protocol A" keypad (the original setting at
manufacture) or a "Protocol B" keypad. You can prohibit the projector from
responding to a particular protocol, or you can ensure that the projector responds
to either protocol. You can also prevent the projector from responding to the
keypad by selecting OFF.

NOTE: Keypads are set at manufacture to "Protocol A". Please see 2.10,
Keypad Protocols for information about setting keypad protocols.

Broadcast Keys
Check if you want keypad commands sent to one projector to be relayed to all
projectors in a network. The

command on the built-in keypad (or

on wired keypad) will still allow you to control a specific projector.

Projector Number

Enter a three-digit number (such as "000") to assign a number to the
projector currently in use. Numerical identity for projectors is

«
...
50
51
52
53
54
...
»

Summary of Contents for VistaGRAPHX 2500






































































































Reviews:

No comments

Related manuals for VistaGRAPHX 2500

Brand: Acer Pages: 62

Brand: Acer Pages: 58

S1370WHn Series

Brand: Acer Pages: 64

Brand: Acer Pages: 140

Brand: Acer Pages: 126

Brand: Acer Pages: 2

Brand: NEC Pages: 2

Brand: Omnimount Pages: 28

Brand: InFocus Pages: 56

CineTheatre Galleria

Brand: LP Morgan Pages: 16

Brand: Optoma Pages: 1

Brand: Dukane Pages: 4

Brand: M-system Pages: 3

Brand: Barco Pages: 112

Brand: Sanyo Pages: 1

Brand: Sanyo Pages: 3

Brand: Sanyo Pages: 1

Brand: Sanyo Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands