Electrohome VistaGRAPHX 2500, User Manual

Page: 14 / 101

INSTALLATION & SETUP
VistaGRAPHX 2500 User's Manual
2-11
Figure 2-10. RGB Inputs
To control audio levels in an audio/visual system, connect pre-amplified (line
level) audio inputs to the left and right channel audio inputs on the DAT 1 panel.
Then connect the audio outputs to external audio amplification equipment for
sound output. All audio connection cables require standard RCA type phono
plugs.
The Composite/S-Video input provides simultaneous connection of both a
composite video source (VID 1) and an S-Video source (VID 2).
If connecting a S-Video source, use the 4-pin mini DIN connector or the Y and C
BNC connectors (luminance and chrominance) — do not use both as input. If
connecting a composite video source, use the Composite BNC connector or the
RCA phono jack — do not use both as input. See Figure 2-11.
NOTE: If using the loop-through feature for composite or S-Video input, see
"Video Termination" in 3.7, Adjusting and Checking System Parameters.
Figure 2-11. Composite and S-Video Inputs
Composite Video
'
and S-Video Input