Electrohome VistaGRAPHX 2500, User Manual

Page: 26 / 101

OPERATION
VistaGRAPHX 2500 User's Manual
3-3
INFRARED REMOTE KEYPAD -
Keypad for controlling the projector from a
distance.
BUILT-IN KEYPAD -
Alternative location for entering commands.
REMOTE JACK -
Accepts a wired remote keypad for remote control of the
projector.
HARD RESET -
Emergency access for powering down the projector in the event
of a system failure. Insert pen point or small screwdriver.
You may use any of three different keypads to control the projector: the IR
remote, the built-in, or the wired remote (optional). Each keypad provides
complete control of the projector, however you may find one keypad more
appropriate than another, depending on your specific installation and application.
On each keypad, some keys cause a direct action (such as to turn the
projector on or off). Other keys provide access to actions via on-screen menus
and other windows. On the built-in keypad, keys labeled with both a direct
function as well as a number (such as
and ) default to their direct
function (in this case
) unless numeric entry is expected and required to
complete a specific command — there is no separate function key for enabling
direct vs. numerical entry.
The built-in keypad is located on the back panel of the projector.
Figure 3-2. Built-in Keypad
3.3 Using the
Keypads
Built-in Keypad
'