Electrohome VistaGRAPHX 2500, User Manual

Page: 33 / 101

OPERATION
VistaGRAPHX 2500 User's Manual
3-10
signal present, all source-dependent adjustments are disabled. Also note that
after 15 minutes of inactivity, the projector returns to presentation level.
When finished with a function menu, do one of the following:
•
Press to accept any changes made and return to your image.
•
Press to accept any changes made and return to the main menu.
If at any time you are uncertain
about a menu or option, press
to display detailed information
about the current menu or any
highlighted item. A scroll bar will
be available on the right-hand side
of a help window if there is
additional text — use the arrow
keys to scroll (Figure 3-5). Press
again to exit.
NOTES: 1) While Help is
displayed, the
and keys still
operate any current slidebar or pull-down list in view, such as "brightness" or
"tint".
If you are at presentation level,
press
to access General Help
information. Press to return to
presentation level.
Whenever the projector is not at presentation level, such as when there is a
slidebar, menu, message or test pattern displayed, you have limited time in which
to make a keypad entry before the projector returns to presentation level. These
time-outs vary depending on the current display, as shown in the following chart:
TIME-OUTS
Display Time-out
Slidebar (from pres.) 5 seconds
Slidebar (from menu) 15 minutes
Lamp Timer Msg. 30 seconds
Source entry 5 seconds
Direct control entry 5 seconds
Other 15 minutes
On-line Help
'
Figure 3-5. Context-sensitive Help.
Figure 3-6. General Help (from
Presentation Level)
Time-outs
'