Pag. 108 di 152
−
The
n
record in file 00.
T
, where
257
≤
n
≤
513
, contains information about type
T
file number
n-
257
.
Each record contains an instance of the variable called “
File status
”
and one of the variable called
“Service status”
.
10.2.1 File status
Bit 2 (value 04h) of such variable is a flag (named “
empty flag
”) that indicates if the corresponding
file
number
is an actual disk file.
When bit 2 (value 04h) of “
File status
” variable is not set, the record contains information relating to a file
actually present on disk. In the contrary, when bit 2 of “
File status
” variable is set, the only significant field
within the file content is “
Size
” representing the free space on disk.
10.2.2 Service status
Bit 0 of “
Service status
” indicates the status of the service to which the file pertains.
1 = all OK ==> the configuration files are available and correct and the service is under execution.
0 = Error in the configuration file; service suspended until new and correct configuration file is written
The remaining bits indicate a well identified service status however they do not provide the same
information therefore reference to each service must be considered for their meaning.
