Eldes ESIM264, Installation Manual

Page: 5 / 60

8 9 8 9 EN EN MANUAL ELDES ESIM264 V3.2 MANUAL ELDES ESIM264 V3.2
Alarm Notifications and Arm/Disarm Notifications
Parameter Default Value
Configurable by:
SMS EKB2 EKB3
Configuration
Tool
Call in Case of Alarm Enabled
  
Send Alarm SMS to All Users Simulta-
neously
Disabled
   
Send Arm/Disarm SMS to User 1... 5 Enabled
  
Send Arm/Disarm SMS to All Selected
Users Simultaneously
Disabled
   
Mains power Status
Parameter Default Value
Configurable by:
SMS EKB2 EKB3
Configuration
Tool
Mains power Loss Delay 30 seconds
  
Mains power Restore Delay 120 seconds
  
Peripheral Devices
Parameter Default Value
Configurable by:
SMS EKB2 EKB3
Configuration
Tool
Temperature Sensor MIN 0 °C
   
Temperature Sensor MAX 0 °C
   
Allow adding New iButton Keys Disabled
   
System Notifications
Parameter Parameter
Configurable by:
SMS EKB2 EKB3
Configuration
Tool
General Alarm Enabled
  
System Disarmed Enabled
  
System Armed Enabled
  
Mains Power Loss Event Enabled Enabled
   
Mains Power Restore Event Enabled Enabled
   
Low Battery Enabled
  
Periodical Info Enabled
  
Tamper Alarm Event Enabled
  
Battery Failed Enabled
  
System Started Enabled
  
Wireless Signal Loss Enabled
 
Temperature Fallen Enabled
   
Temperature Exceeded Enabled
   
System Shutdown Enabled
  
Partitions
Parameter Default Value
Configurable by:
SMS EKB2 EKB3
Configuration
Tool
Partition 0 Name PART0
  
Partition 1 Name PART1
  
Keypad 1... 4 Partition PART0
  
Keypad Partition Switch Disabled
  
User Code 1... 30 Partition PART0
  
User 1... 5 Phone Number Partition PART0
  
iButton 1... 5 Partition PART0
  
Zone Partition PART0
  
Monitoring Station
Parameter Default Value
Configurable by:
SMS EKB2 EKB3
Configuration
Tool
MS Mode Disabled
   
Data Messages All Enabled
  
Account (Alarm System ID) 9999
  
Monitoring Station Phone Number 1... 3
(Voice Calls/SMS)
N/A
  
Attempts (Voice Calls/SMS) 3
  
Monitoring Station Phone Number 1...
5 (CSD)
N/A
  
Attempts (CSD) 3
  
Server IP Address (GPRS) 0.0.0.0
   
DNS1 Server IP Address (GPRS) N/A
   
DNS2 Server IP Address (GPRS) N/A
   
Protocol (GPRS) UDP
   
Server Port (GPRS) 20000
   
Local Port (GPRS) N/A
   
APN (GPRS) N/A
 
User (GPRS) N/A
 
Password (GPRS) N/A
 
Profile (GPRS) Profile1
 
GPRS Attempts 3
  
Delay Between Attempts (GPRS) 600 seconds
  
Unit ID (GPRS) 0000
  
Test Period (GPRS) 180 seconds
  
Communication - Primary N/A
  
Communication - Backup 1... 4 N/A
  
Protocol over GPRS EGR100

Additional Parameters
Parameter Default Value
Configurable by:
SMS EKB2 EKB3
Configuration
Tool
Event Log Enabled
  
Microphone Gain 12
 
Speaker Level 85
 
GSM Signal Loss Indication - Delay 180 seconds

GSM Signal Loss Indication - Activate
Output
N/A

Show ARMED Status in Keypad (EKB2) Disabled
