background image

66

67

66

67

EN

EN

MANUAL ELDES ESIM264 V3.2

MANUAL ELDES ESIM264 V3.2

19.6. EWF1 - Wireless Smoke Detector

Main features:

•   Photoelectric sensor for slow smouldering fires 
•   TEST button 
•   Non-radioactive technology for environmental friendly 
•   High and stable sensitivity 
•   Quick fix mounting plate for easy installation 
•   LED operation indicator 
•   Built-in speaker for audio alarm indication 
•   Auto-reset when smoke clears 

For more details on EWF1 wireless smoke detector, please refer to the user manual of the device.

BACK SIDE

RESET button

BATTERY

SIREN

TEST button

LED indicator

DO NOT PAI

NT

FRONT SIDE

TAMPER

switch

41

19.6.1. Interconnection

The interconnection feature automatically links all wireless smoke detectors that are paired with the alarm system. When any EWF1 de-

tects smoke, it will sound the built-in siren and send the signal to the alarm system resulting in an instant alarm followed by built-in siren 

sound caused by the rest of EWF1 wireless smoke detectors. EWF1 device that detected smoke will auto-reset when the smoke clears, 

while the rest of EWF1 smoke detectors will continue to sound in accordance with the set time period (by default - 30 seconds).

By default, the interconnection feature is enabled and the siren alarm duration is 30 seconds. To manage these parameters, please refer 

to the following configuration methods.

Disable 

interconnection

EKB2

Menu path: 

OK 

 iiii 

 OK 

 PRIMARY SETT INGS 

 OK 

 SIREN SETTINGS 

 OK 

 EWF1 SIREN 

INTERC. 

 OK 

 DISABLE 

 OK 

Value:

 iiii 

– 4-digit installer code.

EKB3/ 

EKB3W

Enter parameter 50 and parameter status value: 

50 0 #

Example: 

500#

Config 

Tool

This operation may be carried out from the PC using the 

ELDES Configuration Tool

 software.

Enable 

interconnection

EKB2

Menu path: 

OK 

 iiii 

 OK 

 PRIMARY SETT INGS 

 OK 

 SIREN SETTINGS 

 OK 

 EWF1 SIREN 

INTERC. 

 OK 

 ENABLE 

 OK 

Value:

 

iiii

 – 4-digit installer code.

EKB3/ 

EKB3W

Enter parameter 29 and parameter status value:

50 1 #

Example: 

501#

Config 

Tool

This operation may be carried out from the PC using the 

ELDES Configuration Tool

 software.

Set EWF1 siren alarm 

duration

Config 

Tool

This operation may be carried out from the PC using the 

ELDES Configuration Tool

 software.

NOTE: 

  The maximum supported EWF1 siren alarm duration is 255 seconds (4 mins. 15 secs.) even if the system‘s alarm duration value is longer.

NOTE: 

  System‘s alarm duration has a higher priority against the EWF1 siren alarm duration, therefore EWF1 will sound as long as the 

system‘s alarm duration set up, unless the set up value for EWF1 siren alarm duration is shorter.

For more details on EWF1 wireless smoke detector, please refer to the user manual of the device.

19.7. EW2 - Wireless Zone and PGM Output Expansion Module

BA

TTER

Y

-

+

BA

TTER

Y

-

+

BA

TTER

Y

-

+

RESET

STATUS

POWER

ANT

Z1 Z2

Z3 Z4 T1

T2 C1 C2

COM

COM

COM

DC+

RESET

F1

42

Main features: 

•   4 zone terminals. 
•   2 open-collector outputs. 
•   Battery or externally-powered. 
•   Compatible with any third-party wired sensor or siren.
EW2 is a wireless device intended to expand ELDES alarm system capabilities 

by providing wireless connection access to any third-party wired devices. EW2 

comes equipped with 4 zone terminals designed for wired digital sensor con-

nection, such as magnetic door contact, motion detector etc. In addition, the 

2 open-collector outputs on board allow to connect any wired siren as well as 

to connect and control any electrical appliance, such as gates, lights, watering 

etc. The device can operate by powering it either using an external power sup-

ply or 3 x 1,5V AA type alkaline batteries on board. Once the external power 

supply is disconnected, EW2 will automatically switch to battery power. 
The maximum number of EW2 devices that can be paired with the system 

depends on the number of the existing zones in system’s configuration. In 

case no keypad zones, no EPGM1 zones, no virtual zones and no other wireless 

zones exist, the system will support up to 8 EW2 devices.

For more details on technical specifications and installation, please refer to 

the latest user manual of the device located at www.eldes.lt/download

Summary of Contents for ESIM264





























































Reviews: