EKOM invent DK50 DI, User Manual

Page: 8 / 148

GENERAL INFORMATION
8 NP-DK50 DI-15_08-2020
USE

The equipment can be installed and operated only in a dry, ventilated and
dust-free area. Climatic conditions for operation - see Technical data.

The compressor must stand on a flat and stable base.

The compressor must not be exposed to rain. The equipment must not be
used in humid or wet environments. Never use the compressor in the
presence of flammable liquids or gases.

Before connecting the compressor to respiration equipment, make sure
that it meets the requirements of the respiration equipment. Refer to the
Technical data for this purpose.

Any use other than the compressor‘s intended use is not considered to be
safe. The manufacturer is not responsible for any damages that result if
the compressor is used for any other purpose. Risk is exclusively
assumed by the operator/user.
STORAGE AND TRANSPORT
The compressor is shipped from the factory in transport packaging with the
pump stabilized, protecting it from damage during transport.
For transport, always use the original packaging and secure the compressor
in the upright position.
Protect the compressor from humidity, contamination and extreme
temperatures during transport and storage. A compressor in its original
packaging should be stored in a warm, dry and dust-free area.
Keep the packaging material, if possible. If not, dispose of the packaging
material in an environmentally-friendly way. Cardboard can be recycled.
Before moving or transporting the compressor, the pressure in the air tank
and hoses must be released.
Slowly vent air from the compressor by screwing the provided nipple (it may
be an integral part of the outlet house) into the OUT connector (7) and
waiting until all air has been vented.
Warning! Wear eye protection when venting the air!
Prior to transport it is necessary to secure the motor inside the
compressor (Chapter 4.)