Edirol Direct Linear DV-7DL Pro Owner'S Manual Download Page 348

Page: 348 / 372

348

Other Features

The DV-7DL PRO can synchronize operation with a Roland multi-track recorder.

The models for which synchronization is possible are listed below.

•

VS-2480

•

VS-2480CD

•

VS-2400CD

•

VS-2000CD

•

SI-24 (Controller included with the

Studio Package Pro)

Performing operations synchronized with a multi-track recorder makes it possible to

carry out difficult audio editing using just the video editing unit.

•

Wide-ranging expressiveness using 24 audio tracks

•

Dynamic, high-quality expression using a rich array of audio effects

•

Amazing sense of realistic presence using 5.1-channel surround sound features

Synchronization with the multi-track recorder is accomplished through

MTC (

MIDI

Time Codes) and

MMC (MIDI Machine Control). MTC and MMC output from the

DV-7DL PRO requires a dedicated MIDI interface.

To sync, connect MIDI IN on the

UM-1X or

UM-1S X to MIDI OUT on the VS (or

whatever model you are using), and connect MIDI OUT on the UM-1X or UM-1SX

to MIDI IN on the VS.

The following settings enable the DV-7DL PRO to send MTC and MMC signals to

the multi-track recorder. For information about the settings for the receiving of MIDI

on your VS series device, refer to the owner’s manual for the corresponding model.

Feature for

Synchronizing with an External Device

Remote

MIDI

Video Output

Audio Output

UM-1X

DV-7DL_PRO_e2.book 348 ページ２００５年１月７日　金曜日　午後１２時２分

Summary of Contents for Direct Linear DV-7DL Pro





















































































































































































































































































































































































Search results

Summary of Contents for Direct Linear DV-7DL Pro

Reviews:

Related manuals for Direct Linear DV-7DL Pro

Brands by name

Popular brands

Edirol Direct Linear DV-7DL Pro, Owner'S Manual

Search results

Summary of Contents for Direct Linear DV-7DL Pro

Reviews:

Related manuals for Direct Linear DV-7DL Pro

Brands by name

Popular brands