Edirol Direct Linear DV-7DL Pro Owner'S Manual Download Page 339

Page: 339 / 372

339

Using Projects

To open a previously saved project, follow the steps described below.

From the Project menu, select “Open.”

Go to the Project menu and select “Open.” The Project Selection window appears.

The DV-7DL PRO, opening a project displays the sizes of existing projects in the

Project Selection window.

Choose the hard disk.

If a removable hard disk is inserted, choose the hard disk containing the project you

want to open. Choose either “Internal” or “Removable.”

Select the name of the project and then click the OK button.

Click the name of the project, making it change color. Clicking the “OK” button

opens the project you selected.

Open the project.

DV-7DL_PRO_e2.book 339 ページ２００５年１月７日　金曜日　午後１２時２分

Summary of Contents for Direct Linear DV-7DL Pro





















































































































































































































































































































































































Search results

Summary of Contents for Direct Linear DV-7DL Pro

Reviews:

Related manuals for Direct Linear DV-7DL Pro

Brands by name

Popular brands

Edirol Direct Linear DV-7DL Pro, Owner'S Manual

Search results

Summary of Contents for Direct Linear DV-7DL Pro

Reviews:

Related manuals for Direct Linear DV-7DL Pro

Brands by name

Popular brands