Edirol Direct Linear DV-7DL Pro Owner'S Manual Download Page 187

Page: 187 / 372

187

Creating Titles

Check the results.

If you have created a title with overlap or soft shadows, click the Preview button.

You can verify the results in the Titler’s Preview window and on the television

monitor.

When you have made the setting for shadows with blur (Soft Shadow), the results do not

appear in the Preview window until you click the Preview button.

We recommend checking the composited video on the television monitor to verify the state of

text positioning, colors, edges, and the like.

In some cases you may be unable to select text or a shape easily because it is under

other text or shapes. Holding down the "Alt" key on the keyboard and clicking jumps

over texts or shapes overlaid on top, making it possible for you to select shapes or

the like on lower layers.

How to Select Overlapping Shapes

DV-7DL_PRO_e2.book 187 ページ２００５年１月７日　金曜日　午後１２時２分

Summary of Contents for Direct Linear DV-7DL Pro





















































































































































































































































































































































































Search results

Summary of Contents for Direct Linear DV-7DL Pro

Reviews:

Brands by name

Popular brands

Edirol Direct Linear DV-7DL Pro, Owner'S Manual

Search results

Summary of Contents for Direct Linear DV-7DL Pro

Reviews:

Brands by name

Popular brands