manualshive.com logo in svg

Edirol Direct Linear DV-7DL Pro, Owner'S Manual

Share
Download
Edirol Direct Linear DV-7DL Pro Owner'S Manual Download Page 245

 

245

 

Effects

 

13

 

Perform rendering.

 

Click the Rendering button to perform rendering. This lets you verify the effect with 

 

smooth movement.

You can set key-frame markers not just at the beginning and end of material, but in 
the middle as well.

Making settings in the middle makes it possible to create an inset screen that 
appears, gradually grows larger, stays at the same size, then gradually becomes 
smaller and disappears.

The only setting items that you can register for key frames are the position and size 
that can be changed in the Effect Editor’s Preview window. The settings for other 
items cannot be changed for individual key frames.

To delete a key-frame marker, jump to the location of the key-frame marker, then 
click the Delete Marker button. Use this when you have made settings at an 
unintended location or when you want to start over and redo the settings.

You can use a similar procedure to take images blanked out with Chroma Key or 
Luminance Key and make them move.

Key-frame markers are off by default for these two effects. After displaying the Effect 
Editor, click the On/Off button. The button turns red, and you can then carry out 
operations in the same way as described above.

DV-7DL_PRO_e2.book 245 ページ ２００５年１月７日　金曜日　午後１２時２分

Summary of Contents for Direct Linear DV-7DL Pro





















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands