Edirol Direct Linear DV-7DL Pro Owner'S Manual Download Page 141

Page: 141 / 372

141

Creating Titles

Changing the Style of a Font

You can make "style" settings for the Japanese font "Haru" and for some English

fonts.

Styles affect the thickness and angle of the font. You can select "Roman" (regular),

"Italic", "Bold", or "Bold Italic". Not all styles may be available for every font.

To change the style for text, follow the procedure described below.

Click the text whose style you want to change.

The selected text appears enclosed in dotted lines.

Select the style for the text.

Click "Style". then select the style you want.

If a font has just a single style, only "Roman" is displayed.

Daisy

DV-7DL_PRO_e2.book 141 ページ２００５年１月７日　金曜日　午後１２時２分

Summary of Contents for Direct Linear DV-7DL Pro





















































































































































































































































































































































































Search results

Summary of Contents for Direct Linear DV-7DL Pro

Reviews:

Brands by name

Popular brands

Edirol Direct Linear DV-7DL Pro, Owner'S Manual

Search results

Summary of Contents for Direct Linear DV-7DL Pro

Reviews:

Brands by name

Popular brands