Edelbrock Pro-Tuner, User Manual

Page: 189 / 235

Advanced Tuning with the Pro Tuner System 189
5.10 Reset ECU to last programmed setup
Visit us at: http://www.edelbrock.com
Reset to Last Programmed Setup
This feature is accessed via the File Menu from the any of the main screens. It will
reset all the MAP's, values, and wizard choices back to the preset values that the
user started with after the wizard last programmed the ECU.
This function can
assist the user to begin the calibration process again if needed. The user can program
the default factory setup by stepping through the setup wizard for the fuel control mode
that you desire (Speed/Density or Alpha-N) and choosing the default or standard
settings.
Resetting to the originally programmed setup using this function will take the settings
and choices back to the ones
you last programmed into the ECU when you completed the
setup wizard. Use this feature with the engine NOT RUNNING, but with the ignition ON.
After confirming your selection, turn the ignition switch off for 10 seconds. The values
should then be reset.