Edelbrock Pro-Tuner, User Manual

Page: 32 / 235

32
Figure 10
3. Insure that the ECM case does not touch or rub against anything,
particularly metal or wiring. The case
MUST be isolated from grounds and
voltage sources.
4. Do not mount hardware in such a manner as to cause stress on the harness. Do
not pull, stretch, or kink wires and connectors. Minimize effect of engine torque
movement on short sections of harness. Improper installation can cause
intermittent wire or connector failure or total loss of connection.
5. Route harnessing to avoid sharp edges, heat, and wear points. Clamp harnessing
with approved clamps and clips. - Do ALL installation work with the vehicle battery
disconnected.
6. A typical PCM under-hood mounting installation is shown in Figure 11.