Edelbrock Pro-Tuner, User Manual

Page: 131 / 235

Basic Tuning with the Pro Tuner System 131
value other than that will act as a global transient multiplier. It is better to only
use the main delta tables to tune the transient at operating temperature!
A multiplier value in the transient maps or ECT Trans Fuel Mult Tbl is a function of
percentage. A value of 1.10 equals 10% rich, 1.25 equals 25% rich, etc.
Do not enter
values less than 1.00. If on rare occasion, a value of less than 1.0 is required at normal
operating temperature, it means that your base fuel map is too rich. To correct, you
should reduce the fueling of your base fuel map and reset the ECT Trans Fuel Mult Map to
1.0 in that cell.
Verify satisfactory transient tuning under both acceleration and deceleration conditions.