manualshive.com logo in svg

eCopy ShareScan 4.2, Installation And Setup Manual

Share
Download
eCopy ShareScan 4.2 Installation And Setup Manual Download Page 202

192  

|

  Reference: Managing the ScanStation Client

Selecting a different TWAIN driver

You select a TWAIN driver when you license a TWAIN scanner. You may need to select a 
different driver if you change the device or if you selected the wrong driver.

To select a different TWAIN driver:

1

In the console tree, select 

Devices

 > <

device_name

> > 

Manage

.

2

Select the 

Status

 tab.

3

Select 

Enable TWAIN

.

4

The Browse button next to the 

Driver Name

 field becomes active.

5

Click the Browse button ( ).
The 

Select Source

 window opens.

6

Select the driver name and then click 

Select

.

The Client is now configured to use the new driver.

Note:

The TWAIN driver that you select must be from the same manufacturer as the device.

Summary of Contents for ShareScan 4.2











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands