manualshive.com logo in svg

eCopy ShareScan 4.2, Installation And Setup Manual

Share
Download
eCopy ShareScan 4.2 Installation And Setup Manual Download Page 198

188  

|

  Reference: Managing eCopy-enabled devices

To save profiles and publishing information:

1

In the console tree, right-click 

Devices

 and then click 

Publish connector profiles

.

The 

Publish Connector Profiles

 window opens.

2

Leave the specified Base location or select a new one.

3

Click 

Save

.

All current profiles and publishing information are saved in the eCopyPublishingInfo 
folder under the Base location folder.

To delete a group:

1

In the console tree, right-click 

Devices

 and then click 

Publish connector profiles

.

The 

Publish Connector Profiles

 window opens.

2

Select the group of profiles that you want to remove.

3

Click 

Delete

.

4

Click 

Yes

 to delete the profile.

Summary of Contents for ShareScan 4.2











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands