manualshive.com logo in svg

eCopy ShareScan 4.2, Installation And Setup Manual

Share
Download
eCopy ShareScan 4.2 Installation And Setup Manual Download Page 112

102  

|

  Reference: Connector-specific configuration information

The following table describes the advanced account settings for each combination of protocols. 
For information about the protocols, see Table 21.

TABLE 24. Exchange Properties: Advanced Account Settings

Protocol Combination

(Advanced Settings tab)

Field/Button Name

Description

MAPI/MAPI

Uses MAPI to retrieve the user 
information when the Search 
while typing option is enabled, 
and to send scanned documents.

Mailbox name different 
from the User name

Tells the connector to use the name specified 
in the Mailbox name field if the mailbox name 
is different from the user name for any reason.

Mailbox name

The mailbox name that is used by the user 
account.

E-mail ID

The e-mail ID of the user account.

LDAP/MAPI

If the connector cannot find a 
Global Catalog Server, it prompts 
you to use the Advanced Account 
Settings window to configure the 
Global Catalog Server settings.

Locate server at 
runtime

Enables the user at the device to select a 
server.

Always use the 
following server

The name of the Global Catalog Server to be 
used at the device.

Port

The port that you want the server to use.

Server requires SSL for 
communication

Select this option if the Global Catalog Server 
requires a Secure Socket Layer (SSL).

Add Base DN

Defines a starting point for the Global Catalog 
Server search that takes place from the 
authentication window at the device.  When 
you select a base DN (Distinguished Name), 
the Search while typing option searches the 
forest below the location of the Base DN. 
The browse button opens the Start Search At 
window, where you can select a Base DN in 
the Active Directory forest.
Only users within the DN can authenticate, 
however, documents can be sent to any user 
in the forest.
If this field is left blank, the search includes the 
entire forest.

Summary of Contents for ShareScan 4.2











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands