manualshive.com logo in svg

eCopy ShareScan 4.2, Installation And Setup Manual

Share
Download
eCopy ShareScan 4.2 Installation And Setup Manual Download Page 189

 eCopy ShareScan

®

 Installation and Setup Guide 

|

 179

Configuring the ID Services function

ID Services are available on compatible MFP devices that use identification devices such as card 
readers or proximity cards.  ID Services allow user authentication credentials from the 
identification device  to be encrypted and passed to ShareScan. This preserves security and 
streamlines the logon process by allowing the user to avoid entering authentication credentials at 
the device.

To configure ID Services:

1

In the console tree, select the device for which you want to enable the ID Service and then 
select 

Activity Tracking

.

The right pane displays the Activity Tracking information.

2

On the 

Activity Tracking

 tab, select 

Enable

 and then click 

Save

.

ID Services cannot be activated unless Activity Tracking is enabled.

3

Select the 

ID Services

 tab.

4

Enable the service and specify the settings (see Table 55).

5

Click 

Save

.

The ID Service settings are saved for the selected device.

Summary of Contents for ShareScan 4.2











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands