manualshive.com logo in svg

eCopy ShareScan 4.2, Installation And Setup Manual

Share
Download
eCopy ShareScan 4.2 Installation And Setup Manual Download Page 171

 eCopy ShareScan

®

 Installation and Setup Guide 

|

 161

Destination settings

Scan to eCopy Desktop enables you to scan to the following destination types:

■

Windows Folder

■

Novell Folder: If Novell is installed.

■

FTP Folder

For each type of folder you must supply the folder location and authentication settings.

TABLE 

49

. 

Scan to eCopy Desktop: Destination settings

Section

Field

Description

Folder Location

(For an FTP folder 
you must enter and 
test the 
authentication 
information before 
you select a folder 
location.)

path to the 
folder

Destination information for the scanned documents.
For Windows or Novell, click the Browse button and then select an 
existing folder or create a new folder and then select it. For an FTP 
folder, enter the FTP location, such as "ftp://ftp01/scans". (The 
Browse button is not available for FTP folders.)

Enable 
subfolder 
navigation

Enables users to select a subfolder at the device.

Maximum 
folder levels

The number of folder levels down that users may navigate.

Summary of Contents for ShareScan 4.2











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands